null Skip to main content

RESOURCES

Maintenance and Care

Proper maintenance and care of your TRINITY product will ensure the surface finish is protected.

Can't find what you need? Reach out to us!

Stainless Steel Surfaces

  1. Clean surface stains as soon as possible. Surface stains can be wiped clean with a soft cloth and water or neutral detergent. Do not use strong alkaline or acidic cleaner.
  2. Rinse surfaces with clean water and dry the surface completely with a soft cloth to prevent corrosion and water marks.
  3. Wipe in the direction of the metal grain when cleaning or drying to help provide a uniformed look. A stainless steel cleaner may be used to remove stains and protect against scratches. They can also be used to polish surfaces.
  4. Read and follow the directions carefully and be sure to test the cleaner in an inconspicuous spot first.

Solid Wood Surfaces

Rubberwood / Bamboo / other solid wood with clear coated surface

  1. Clean surface stains as soon as possible. Surface stains can be wiped clean with a soft cloth and water or neutral detergent. A furniture cleaner may be used to remove stains and protect against scratches. They can also be used to polish surfaces.
  2. Dry thoroughly with a clean cloth.
  3. Avoid excessive sun and heat exposure.
  4. Read and follow the directions carefully and be sure to test the cleaner in an inconspicuous spot first. The surface can be conditioned with food-grade mineral oil.

Knotty Adler Wood Surfaces

  1. Mix 1/4 cup of dishwashing soap and 1 tbsp of vegetable oil with a bucket of warm water. This is an excellent home-made substitute for commercial wood-cleaning products, as the soap is mild enough not to harm the wood, and the vegetable oil will polish the wood.

  2. Wipe the stained wood area to be cleaned with a dry, clean cloth to ensure the surface is free of dust and loose dirt.

  3. Apply the oil/soap solution to the stained wood surface with a clean sponge. Use only a small amount of the solution.

  4. Rinse the sponge with clean water and wipe the stained wood surface with the wet sponge to remove any excess soapy residue.

  5. Buff the stained wood dry with a clean, dry cloth. This will remove excess water and polish the wood to a clean, streak-free shine.

Reclaimed Wood Surfaces

  1. Add a small amount of gentle soap to a bucket of warm water.

  2. Apply the soap solution to the reclaimed wood with a clean cloth.

  3. With a second clean cloth, rinse the soap solution with fresh water

  4. If there are tricky areas that have crumbs, dust or other buildup stuck in them, use a soft brush to remove them.

MDF Board w/ Laminated Surfaces

Found in most TRINITY shoe benches

  1. Remove dust with a dry cloth.
  2. Clean surface stains as soon as possible. Surface stains can be wiped clean with a soft cloth and warm water or neutral detergent.
  3. Dry thoroughly with a clean cloth. Do not let any water seep into the edges of the surfaces or the board may blister.
  4. Avoid sharp objects to prevent cutting of laminated surface.

Powder-Coated Finish

Anthracite®, black, dark bronze, gray, epoxy, etc.

  1. Clean surface stains as soon as possible. Surface stains can be wiped clean with a soft cloth and warm water or neutral detergent. Do not use strong alkaline or acidic cleaner.
  2. Rinse thoroughly with water and wipe dry with cloth.
  3. Avoid sharp and high temperature objects on the surface.

EcoStorage® / Chrome Finish

  1. Clean surface stains as soon as possible. Surface stains can be wiped clean with a soft cloth and warm water or neutral detergent. Do not use strong alkaline or acidic cleaner.
  2. Rinse thoroughly with water and wipe dry with cloth.
  3. Avoid sharp and high temperature objects on the surface

Polystyrene (PS) / Polypropylene (PP) / other plastics (PE/ABS etc)

  1. Surface stains can be wiped clean with a soft cloth and warm water or neutral detergent.
  2. Wipe dry thoroughly with a clean cloth.
  3. Do not use abrasive materials for cleaning.

PRO Garage Cabinet Handles

  1. Clean surface stains as soon as possible. Surface stains can be wiped clean with a soft cloth and water or neutral detergent. Do not use strong alkaline or acidic cleaner.

  2. Do not use scrubbing powder, wire brush, steel wool or other harsh abrasive materials for cleaning.

  3. Keep away from open flame and high temperature heat source.

Workbench Handles

for drawer pulls, and door handles

  1. Clean surface stains as soon as possible. Surface stains can be wiped clean with a soft cloth and water or neutral detergent. Do not use strong alkaline or acidic cleaner.

  2. Do not use scrubbing powder, wire brush, steel wool or other harsh abrasive materials for cleaning.

  3. After cleaning, may consider treating the anodized surface with quality wax for extra protection.

Still Need Help?